4 STROKE |
|
- Replace Lower Unit Gear Lube.
|
- Remove Propeller, Inspect Propeller, Propshaft and Seal. Lube Propshaft, Reinstall Propeller and Repalce Cotter Pin.
|
- Replace Water Pump Impeller and Inspect Related Components.
|
- Replace Engine Primary Fuel Filter.
|
- Replace Boat Water Separator Filter.
|
- Repalce Engine Oil and Oil Filter.
|
|
- Inspect and Replace Zinc Anodes.
|
- Inspect Timing Belt and Tension.
|
- Check for Water Leakage Throughout the Engine.
|
- Check Power Trim operation and Top Off Fuild.
|
- Check Battery Condition and Connections.
|
- Inspect Fuel System and Check for Leaks.
|
- Adjust Linkages and Controls.
|
- Check and Adjust Cowling Latches and Cowling Seal.
|
- Inspect Steering and Top Off Steering Fluid.
|
- Top Off Any Other Hydraulic Fluids (Trim Tabs, Power Pole, Jack Plate, etc...)
|
- Grease Engine at all Grease Points and Spray Other Areas With Corrosion Inhibitor.
|
- Exterior Inspection of Engine.
|
- Test Run Engine and Check Shifting.
|
- Reset Maintenance Interval on Gauge and Note Engine Hours.
|